REACHA
BIKE CONNECTOR 2.0
THE BIKE ADAPTER BY REACHA
The consistent further development of our proven bike connector 1.0 for connection to the bicycle saddle turns every reacha handcart into a bicycle trailer. The connection to the bicycle saddle may seem strange at first glance, but it has significant advantages. It enables the use of SPORT SHORT, LONG, PRO and XXL as a handcart, as the goods to be transported are balanced horizontally at a comfortable hand height. In addition, the drawbar and the goods to be transported can be guided over the rear tyre of the bicycle, which reduces the overall length of the combination compared to a connection to the rear axle of the bicycle. The new so-called power joint made of hard rubber allows the bike to be rotated and put down without having to release the bike hitch. And with the snap lock on the Bike Connector, you can connect and disconnect the trailer from the bike in seconds and switch to manual operation. The Bike Connector can be (dis)mounted to the saddle pole (or frame) using a specially developed Velcro fastener. The adjustable length of the Bike Connector helps with overcoming longer bicycle rear ends. The Bike Connector was specially developed for high loads and even during stress tests with significantly exceeded maximum loads, top speeds of 60km/h and even falls did not affect the Bike Connector.
With each Bike Connector, we include a set of reflectors for mounting on the trailer for road traffic.
The BC short (330-490mm) is recommended for reacha LONG/PRO/XXL models, and the BC long (430-590mm) is recommended for reacha SHORT models. For bikes with bulky luggage carriers (especially e-bikes with battery mounted on the luggage carrier), we also recommend the BC long (430-590mm) for LONG models. A clearance of at least 5cm on the seat post is required for attachment to the bike. The Bike Connector is suitable for seat posts with a diameter of 272mm to 349mm.
2100003754158
Z23-BC
2100003754158